The entire plant can be moved from site to site and as there is no foundation of the machinery involved. After operations, the plant can be lugged back into the shed. It is most suitable for people who change their working sites very often.

Detailed Specifications:
 As per the customers’ requirement the plant can be fitted with a granulator or a crusher. Both these machines are of single toggle models, which are grease cooled and are fitted with double rows of roller bearings. It has M.S. fabricated structure with forged steel shaft. The plant has one diesel oil engine as per British standards. The engine along with an alternator has the capacity to drive the crusher/granulator. The plant can also be provided with electric motors along with the starter switch and control panel.


Click to Enlarge

       
   Crusher/Granulator

 Capacity  

 Feed Size 


 Output
 Product Size


 25 to 125 tons/hr

 125 mm - 700 mm & down

 20 mm & down to
150 mm & down

         Vibrating Screen
 
 
 Size 

 Screen  



 Decks 

 Capacity  

 Mode or drive		  
 3’ x 8’ to 5’ x 15’

 The sheet or woven screen
 hole is made as per
 customers’ specification

 2 

 25 to 150 tons/hr

 Electrical

The screen is fabricated from MS sheets with supporting channels and angles for extra strength.

Helical springs are provided to facilitate vibration of the screen.

The screen, supporting structures and driving motor are all mounted on the same trolley.
 
Feeding Hopper:

It is made of MS plate with 10 mm thick liner plates with 12 mm x 40 mm MS flats. This is supported on MS channels which is provided with reciprocating feeders to suit the capacity of the crushers.
The holding capacity of the hoppers are between 7m3 to 15m3.
          Inner Feeding Conveyor:
 
  No. of Conveyor

  Capacity

  Width of conveyor
 
  Length of conveyor
 
  Mode of drive

  Head Drum Pulley 

  Throughing Iddlers 

  Belt 
  
 1

 25 to 125 tons/hr

 500 to 1000 mm

 10 mts

 Rollon Motors

 Rubberised

 Rubberised

 Standard quality 315/3    nylon endless valcanised
 rubber belt

The structure of the conveyor is fabricated from tubular sections and it carries the finished product of the crusher/granulator to the vibrating screen. It also takes under size materials feeded by the grizzly.



Discharge Conveyor:

The structure of the conveyor is fabricated from tubular sections and each conveyor is mounted on the crushing plant itself.

 No. of Conveyor

 Capacity 

 Width of conveyor 
 
 Length of conveyor 

 Mode of drive 

 Head Drum Pulley

 Throughing Iddlers

 Belt 
  
 3

 15 to 50 tons/hr

 350 to 500 mm

 7 mts

 Rollon Motors

 Rubberised

 Rubberised

 Standard quality 315/3
 nylon endless vulcanised
 rubber belt



          		 Trolly:
 No. of wheels 

 Type of wheels 

 Size		  8 — 12

 Pneumatic tyres

 1210

Complete structure of the trolley is fabricated with heavy channels and fitted with ball bearing in the housing on the wheel for easy movements during to-swing.
Sufficient space to accommodate the crusher/granulator, engine, alternator, vibrating screen, feeding conveyor, discharge conveyor is provided. 
Instead of reciprocating tray feeder, vibrating grizzly feeders can be used at the feeding hopper for separation of fine materials from the feed, when ever required.