|
The Agarwalla
Group
with 60 years experience in crushing industry realises
the need to develop suitable crushing equipment to produce large amounts
of smaller particles with less operating cost and with less power
consumption.
Hence, now we have
developed the third generation of crushing system in India known as VSI
(Vertical Shaft Impactor). The concept of crushing is between stone to
stone, or in other words materials to be crushed hit the same lining
materials at very high speed and the crushed materials are passed through
a cloud of materials again and again. With the help of VSI producing fine
and course material in the range of 0 - 4.75 mm or to 0 - 10 mm becomes
very easy, compared to any other type of equipment such as horizontal
shaft impactor or cone crusher. The main advantages of the vertical
shaft impactor are :
1. Less power
consumption per ton of output.
2. At least 5-10 times less
maintenance and operating cost compared to similar type of
equipment, due to absence of wear and tear of metal parts with stone.
3. Very simple
mechanism for operation and use.
4. Perfect granular
shape of output. This is due to high velocity stones from the
ejector colliding with the liner stones, and chopping off all fine
corners as a result.
5. Perfect control
of output size and capacity with the help of speed variation.
6. Lowest
possible recycle load since 60-70% output can be maintained
within fine and coarse aggregate range.
7. Control of fine
particles in output with speed control only.
8. No need of
graded feed like cone crusher application.
9. Equipment
manufactured in India with complete after sales and spare parts back
up facility.
10. Suitable for
materials with high abrasiveness and silica content, while exhibiting
the lowest wear and tear compared to any other equipment. Due to this
advantage, vertical shaft impactors have wide applications in the
following areas :
i) For production of
crushed sand to replace low value natural sand in all concreting work.
ii) For production of
perfectly cubical shape aggregates as per the specification of MOST
to be used in road making as Bituminous Concrete (BC) and Dense
Bituminous Macadam (DBM).
iii) For pre-grinding
of raw material in cement plant before feeding to the ball mill.
We manufacture VSI with capacities from
70 TPH to 400 TPH with feed size of 40 mm to 150 mm. Please contact us for
further details or for your specific application.
| 
